產品特點：
1、優質的光束質量：本系列機器比傳統的打標機好很多，聚光直徑不到20um/發散角是半導體泵浦激光器的1/4。適用于精密，精細打標。
2、使用成本低廉：電光轉換率高，整機耗電不到500W，是燈泵浦激光器的1/10。
3、免維護操作：激光器無需進行任何維護，也不用調節和清潔鏡片。
4、使用壽命長：使用激光二極管做為泵浦源，其工作時間長達10萬小時。
5、體積小適用于惡劣環境：采用光纜實現激光傳輸，結構緊湊。在一定沖擊振動和較高溫等惡劣環境下也能正常工作。
6、加工速度快：是傳統激光打標機的2到3倍。
廣泛應用：
應用于對深度、光滑度、精細度要求較高的領域，首飾、飾品打標、紙品包裝打標、汽車配件打標、電子五金打標、衛生潔具打標、玻璃制品打標、位圖打標、可在金屬，塑料等表面標刻出精美的圖片。
技術參數
平均輸出功率：20W
激光波長：1060nm
激光輸出功率：20KHZ-80KHZ連續可調
供電電源：單相交流90-260V/50HZ-60HZ
用電功率：< 160W
外型尺寸：570mm*270mm*200mm
整機重量：< 22KG
聚焦光點直徑：<0.01mm
打標速度：30mm/30mm-300mm/300mm可選
打標區域：> 800個標準字符/秒
半導體模塊壽命：> 50萬小時
計算機操作系統：Win98/Win2000/XP
冷卻方式：內置風冷
控制接口：標準USB
可接受的字體與文件格式：WINDOWS操作系統字庫的所有字體/字型(包括各國語言文字/條形碼等);BMP/PCX等帶256灰度圖像文件及DXF/PLT格式的矢量圖形文件
Feature
The new generation of fiber laser marking system has the revolutionary ：
1. It has volume slightly, the semiconductor module has got long life (>500 thousand hours), the power consumption is low (160Q) 、The beam quality is high, the USB connection, supports WIN98/2000/XP and other operating system.
2. It is not influenced by bad circumstance and temperature change; May use the accumulator cell and an automobile smoke under the power cut condition and so on carries on the operation.
Before Fiber laser appeared, laser marking system normally adopts Continuous or pulse output CO2 laser tube, ND-YAG Laser tube as laser source. Compared with traditional laser source, the performance of fiber laser is more excellent, Radiation angle is 1/4 of Diode-pumped laser tube (more suitable for precise and fine marking); the conversion efficiency of electro-optic is 1/10 of lamp pumped solid laser marker; The average working time reaches 100,000 hours;
3. Fiber laser is a type of full air cooling, so it doesn’t need refrigerant device, freezing water pipe or temperaturecontroller, the volume is reduced, energy consumption is decreased, so the use cost of user is much lower than use cost of traditional laser marking system.
4.The pulse of ETL Fiber laser is 10-100KHz repeat frequency working, The volume of the fiber laser which average power output is 10W-20W is only 46*160*250cm, and weight is 10kg; Because laser diode is working in low voltage, the conversion efficiency of electro-optic is up to 70%, and driving power supply can use UPS power supply when the power is shut off the power consumption is only 160W.
Parameter
Power: 20W
Laser length: 1060nm
Laser power: 20KHZ-80KHZ continual
Power supply: Single phase AC 220V/50HZ-60HZ
Electricity power: < 160W
Machine dimension: 570mm×270mm×200mm
Wet weight: < 22KG
Focusing spot diameter: <0.01mm
Marking area: 30mm/30mm-300mm/300mm optical
Marking speed: > 800character/s
Semiconductor life: > 500,000 hour
Marking depth: 0.01-0.2mm
Operational system: Win98/Win2000/XP
Cooling mode: Air cooling
Controlling joint: Standard USB
Accept typeface and document format: WINDOWS operating system fonts all typefaces/Font (including various countries language and writing/Bar co